MZ-24 12 Kanal HoTT Fernsteuerung 2,4GHz Graupner S1006.16.IT

Fernsteuerung mz-24HoTT 12-Ka Graupner S1006.16.IT Description
The MZ-24 HoTT with 12 control functions enables the advanced RC model builder to control nearly any model. The use of Graupner HoTT 2,4 GHz transmission technology ensures great functional reliability through bidirectional communication between transmitter and receiver with integrated telemetry, voice output via speaker or headphone output and ultra-fast response times of the control.
The transmitter has 30 model memories. Programming and telemetry display on 3.5 "large TFT color touch screen. Storage of telemetry data and expansion of the model storage on a micro-SD memory card.
USB port for reading and storing model memories and for firmware upgrades.

Characteristics:

• HoTT (HOPPING TELEMETRY TRANSMISSION) bidirectional 2.4 GHz technology
• 75 jump frequencies for secure transmission
• 12 channels
• 3.5" TFT colour touch screen for easy operation
• Smart voice announcement system for telemetry data, warnings, alarms and vario signal via speaker or earphones
• Real-time data transmission with optional sensors (vario, GPS, fuel, temperature, voltage, current, speed and much more)
• Wireless or wired teacher/pupil system
• Linking of multiple receivers in parallel possible
• High-precision quad ball bearing gimbals (8 in total)
• µSD card slot for expanding model memory and recording telemetry data
• 30 model memories
• Model copy function
• Update capability via USB
• Model type: helicopter, model aircraft (normal or delta), model glider
• Numerous servo settings (distance, limits, reversal, mid-point setting)
• Dual rate and expo, can be set separately for each flight phase
• 6 flight phases
• Helicopter type: 1 servo, 2 servo 180°, 3 servo 120° (2 pitch or 2 roll), 3 servo 140°, 4 servo 90°
• Pitch curves (7 points) can be set separately for each flight phase
• Throttle curves (7 points) can be set separately for each flight phase
• Phase trim for pitch and throttle
• Swash Limit function
• Swash Limit function
• 5 x linear mixers
• 3 x curve mixers
• Numerous types of model aircraft from 1 aileron to 8 flaps (1 aileron, 1 aileron/1 flap, 2 ailerons, 2 ailerons/1 flap, 2 ailerons/2 flaps, 2 ailerons/4 flaps, 4 ailerons/2 flaps, 4 ailerons/4 flaps)
• Elevators: 1 elevator, 2 elevators, V-tail
• Snap-roll function
• Aileron differentiation, can be set separately for each flight phase
• Butterfly function

Info
NEW: Safety:

FHSS, frequency hopping over up to 75 channels

Maximum interference immunity through optimised frequency hopping, wider channel spread and antenna diversification

Intelligent data transfer including error correction

Extremely wide range

Range test and warning function

Undervoltage warning

Extremely wide receiver operating voltage range of 3.6 V to 8.4 V (functional up to 2.5 V)

Numerous fail-safe functions

Key-log function to prevent unintentional changes to menus


Precision:

Shorter response times can be set (10 ms period time)

No additional delays due to module processors All hopping management is handled directly by the 32 bit main processor.

Synchronous servo operation made possible by simultaneous control of servo outputs in blocks of 4


Pilot feeling:

Essentially delay-free control responses due to direct processing

Real-time telemetry evaluation

Wireless teacher/pupil function


Other features:

Simple and extremely fast binding

Free channel assignment (channel mapping), transmitter and receiver mixer functionsand all servo settings are simple to program

Binding of any number of receivers for channel expansion (16 channels maximum) The last receiver bound sends the telemetry data.

Update capability via USB interface guarantees future viability

Specification
Control function: 12
Temperature range : -10...+55 °C
Aerial length: 120 mm
All-up weight, approx.: 840 g
Frequency : 2400...2483,5 MHz
Range approx. : 4000 m
Dimensions (LxWxH): 194 x 287 x 112 mm
Modulation: FHSS
Charging rate : max. 670 mA
Operating voltage : 3,4...6 V