Husky 1800S ARTF Graupner 13410

Shipping time: 3-60 Weeks 3-60 Weeks
Product no.: G13410
GTIN/EAN: 4013389550215
MPN: 13410
This Product was added to our catalogue on 21/06/2017.
286,99 EUR
19 % VAT incl. excl. Shipping costs

Husky 1800S ARTF Graupner 13410

The model for all conditions


Fans of the Short Take Off and Landing aircraft, your new airplane model is there!

This is the Kit! Except for the LED module and the servo cable in the wings, this version is almost "naked". The Graupner Husky is therefore perfect for individualists who would like to take existing components or to bring up their own model setup.

Whether it is sailing with the pre-installed tow coupling, which only requires to be supplemented with a servo and the appropriate linkage, as a bush airplane with the enclosed balloon tires or with the available ski for the winter (No. 13410.43 ski) and in the summer at the lake with float No. 13410.44 floaters).
Like the manned original model, the Graupner Husky 1800S can be specially adapted and retrofitted for every application.

With this airplane model you can easilybring sailplane models up to 2 kg in the F-tow, the usual 4 S 2200 battery and the motor setup ensure sufficient thrust and flight time.

The Graupner Husky 1800S ARTF is finished with an installed LED system and equipped with an extension cable going to the slots for the servos in the wing.


Features


  • Wing quick-release without screws
  • Aluminum landing gear
  • Carbon fiber spar tube for the wings
  • Control surfaces linkage with double rudder horns and ball joints
  • Covered flaps linkage
  • LED lights system
  • Large flaps
  • Capable of short starts and landings
  • Towing clutch
  • Versatile retooling with balloon tires, skis and floaters.
  • 3 different color decorations
  • Take-off weight: 2500 g (including 4S 2200 mAh LiPo)
  • Take-off weight including ski: 2610 g (+ 110 g ski)
  • Take-off weight including float: 2660 g (- 220 g main gear, + 380 g float)


The set contains


Fuselage with LED controller
Wings with LED lights
Elevator
Rudder
Main landing gear with standard wheels and wheel pants
Tail gear
Balloon tires
Spinner
Propeller
Screws and small parts
Decals for three different color versions

Required accessories


  • Radio Control mx-16 HoTT 8 channels (No. 33116.16)
  • Receiver GR-16 HoTT 2.4 GHz 8 channels (No. 33508)
  • Power Pack LiPo 4/22 00 14,8 V 70C XT60 (No. 78122.4)
  • Voltage Module 2-4S, XH (No. 33631)
  • Motor 800KV 12 Pole 14,8V (No. 13410.81) BRUSHLESS CON TROL + T50 (No. S3046)
  • 4x Servo digital DES 47 8 BB MG 12 mm (No. 7917) for the wing
  • 1x Servo digital DES 47 8 BB MG 12 mm (No. 7917) for aero-ow release
  • 2x Servo digital DES 58 7 BB MG 13 mm (No. 7932) for fuselage
  • Extension cablel GOLD 180mm (No. 3935.18)
  • Ski Set (No. 13410.43)
  • Floats Set (No. 13410.44)

Specification
Height [mm]: 350 mm
Weight [g]: 2500 g
Overall length [mm]: 1200 mm
Wingspan [mm]: 1800 mm
Version: ARF
Material: Graupner SOLIDPOR® Rigid
Field of application: F-Schlep, STOL, Water Aircraft
Difficulty level: Advanced
BER_CMSText:

The model for all conditions


Fans of the Short Take Off and Landing aircraft, your new airplane model is there!

This is the Kit! Except for the LED module and the servo cable in the wings, this version is almost "naked". The Graupner Husky is therefore perfect for individualists who would like to take existing components or to bring up their own model setup.

Whether it is sailing with the pre-installed tow coupling, which only requires to be supplemented with a servo and the appropriate linkage, as a bush airplane with the enclosed balloon tires or with the available ski for the winter (No. 13410.43 ski) and in the summer at the lake with float No. 13410.44 floaters).
Like the manned original model, the Graupner Husky 1800S can be specially adapted and retrofitted for every application.

With this airplane model you can easily bring sailplane models up to 2 kg in the F-tow, the usual 4 S 2200 battery and the motor setup ensure sufficient thrust and flight time.

The Graupner Husky 1800S ARTF is finished with an installed LED system and equipped with an extension cable going to the slots for the servos in the wing.

Artikel_Produktbild02: 13410_Husky_1800S_56
Artikel_Produktbild03: 13410_Husky_1800S_60
Artikel_Produktbild04: 13410_Husky_1800S_64
Artikel_Produktbild01: 13410_Husky_1800S_54
Artikel_Produkthauptbild: 13410_Husky_1800S_199


Recommended products:

Parts

Spare Parts