Servo HVS 918 BB,MG Graupner 7965

Servo High-Voltage HVS 930 BB MG 13 mm Graupner 7965 Description
A new series of products to complement our existing range of digital servos.
These DES servos represent a product line which includes a suitable servo for every type of application, covering a vast range of specifications: different case sizes, gearbox types, torque levels and transit speeds, designed for any modeller from the beginner to the competition pilot.
The range includes some fully sealed versions (case screws, case sections and output gear) for increased operational reliability of your models.
Servos with precision-made twin-ballraced gearboxes made of aluminium and other metals guarantee superbly accurate positional performance. High-quality Amtel micro-controllers are used to process the control signals and provide good positional accuracy.
Suitable for RC model aircraft, helicopters, RC cars and model boats.
Do not use in carbon wings with RDS with electrical connection or aluminium levers. The gear/RDS or the aluminium levers must be electrically isolated! Potentiometer voltage is present on the gear.

• High voltage, operating voltage up to 8.4 V!
• Direct operation with 2-cell LiPo batteries
• Operating voltage range 4.8 ... 8.4 V
• Ball bearings
• Metal gearbox

Info
High-Voltage Servo (HVS) High-voltage, 2-cell LiPo batteries provide a direct power supply. This is the new product range from the digital servo segment, HVS (high-voltage servo).
With a maximum permissible operating voltage of 8.4V, the new battery technology can be used without reservation. Naturally, these servos can also be operated with a conventional 6.0 V supply. The very best production quality tops off this line of our servos.

Specification
Holding torque 6.0V, approx.: 108 Ncm
Transit speed at 6.0 V, approx. : 0,11 Sek/40°
All-up weight, approx.: 23 g
Angular travel incl. trim, approx. : 2 x 45 °
Transit speed at 7.4V, approx. : 0,09 Sek/40°
No-load current drain, approx. : 17 mA
Torque at 6.0V, approx.: 54 Ncm
Holding torque 7.4V, approx.: 126 Ncm
Charging rate at 6.0V approx.: 920 mA
Dimensions (LxWxH): 30 x 13 x 33 mm
Torque at 7.4V, approx. : 63 Ncm
Bearings: Lager bb
Replacement gearbox: 7965.2
Charging rate of 7.4V approx.: 1160 mA
Gear unit: Getriebe mg
Operating voltage : 4,8 ... 8,4 V
Neutralimpuls: 1,5 ms
Max. Ansteuerfrequenz: 3,0 / 333 ms / Hz