Print datasheet

6 VOLT LIMITER LIPO Robbe 1-8476 8476

Shipping time:

3-60 Weeks

Product no.: R1-8476XXX

GTIN/EAN: 4005697084766

MPN: 1-8476XXX

For further information, please visit the homepage of this product.

31,04 EUR

19 % VAT incl. excl. Shipping costs

6 VOLT LIMITER LIPO Robbe 1-8476 8476

The robbe 6 Volt Limiter derives a stabilised voltage of 5.7 Volts from a 5-cell NC / NiMH battery or two Lithium cells.The maximum continuous load is 5 Amps, but the peak is significantly higher.A constant voltage supply offers the advantage that the servos always deliver consistent power and transit speed regardless of battery voltage.With this limiter it is also possible to use servos which are only designed for use with four NC / NiMH cells.

Also suitable for stabilising the voltage of two Li-Po cells (7.4 Volts).

In this case the maximum continuous load is reduced to around 3.0 Amps since the unit has to dissipate more waste power. For simple applications one cable to the standard switch harness is all you need.For applications with higher current drain we recommend that you use two cables and a switch harness designed for higher load currents. For example, the 5 A switch harness, No. 8024, or the Safety Switch, No. 8498, which features secure electronic contacts.In this case the second cable is connected to any vacant channel at the receiver.

Note: If you wish to connect a second cable it will be necessary to attach a second lead to the receiver battery.

Two separate batteries must not be used, as this would bridge the input, causing the batteries to be wired in parallel.

Specification::
Weight: 18 g	Dimensions: 55x21x17 mm

This product is compatible with:

L-Spatz 55 Robbe 2610 1-2610

Delivery time: 3-60 Weeks

3-60 Weeks

6,23 EUR

19 % VAT incl. excl. Shipping costs