Roboter RB 1000 Bausatz Graupner R1000

Roboter RB 1000 Bausatz Graupner R1000
You set up your own "humanoid" robot!
The kit contains all the components and small items required to build and operate the robot. No particular computer knowledge is required in order to handle and program the robot, the movement sequences will be programmed by using a graphic supported software.

Excellent mobility is provided by its 19 joints: 12 leg joints, 6 arm joints and 1 neck joint. The "humanoid" is able to operate two more additional servos, also two gyro sensors to maintaining the balance by using the software.

An integral dual-axis attitude sensor mounted on the CPU board allows to start programs for stand up from front and back position.

This high-quality model is assembled from a set of robust components to produce a modern, attractive machine. More than twenty movements will be delivered with the robot, itis possible to get a selection of these sequences from our homepage.

You can also upload your great movements for other RB1000 users! These functions enable the robot to carry out basic movements directly, such as walking and turning, as well as special functions including hand-waving and various poses, without requiring any programming. With these movement sequences it´s very easy to begin your first own motion.

The robot can also be controlled usingan optional Graupner/JR 40 MHz stick transmitter with at least six functions, together with suitable receiver and accessories.

- Blue eloxided aluminium components
- High-performance H8 20 MHz CPU
- 19 x RBS581 digital servos, designed for use in robotics
- Optional installation of two additional servos
- Integral dual-axis attitude sensor on the CPU board
- RS232 serial interface

- Dimensions approx. 300 x 230 x 95mm
- Weight approx. 1,5kg incl. supplied battery
- Joints 19 servos

- Robot kit
- 19 x RBS581 digital servos
- CPU board
- All aluminium / plastic components
- All small items required
- Battery charger
- Battery pack, NiMH 6.0V (2000mAh)
- RS232 interface cable between PC and robot
- RobovieMaker software

Order No. R3000Gyro sensor for maintaining balance
Order No. R9100RB14 SCAN receiver, 40MHz for controlling robot using 40 MHz Graupner/JR 40 MHz stick transmitter withat least six functions
Order No. R1000.10 RBS581 servo

This software is included in the kit, and provides an ultra-simple means of programming the robot to carry out a vast range of movement sequences, and of determining how it is to respond to sensor feedback information. The robot communicates with the PC via the integral RS232 interface.

Operating system: Windows XP
Processor: min. Intel Pentium4, 1 GHz
RAM: min. 128 MB
Interface: 1 x serial RS232
Other: CD-ROM device

- The robot can be controlled using an optional Graupner/JR 40 MHz stick transmitter with at least six functions.
- 4 free channels e.G. LEDs
- 2 free gyro sensor channels for maintaining balance
- Joints can be expanded to a total of 21
- Individual movements and sequence programs can be stored in a file
- Joints and movement sequences can be controlled from a conventional PC keyboard via the RS232 interface
- Response determination if the robot should fall
- 4 auto-routines containing previously established movementsequences
- Direct robot programming via an initialisation file

The future-proof CPU board is capable of meeting the most stringent requirements, and represents the heart of the robot.

- Type: VS-H8PWM28V2
- CPU: H8 20MHz
- Voltage: 5V - 10V
- Dimensions approx. 48,26 x 52,07 x 13mm
- Weight approx. 23g

movement sequences
More than 20 movement sequences on CD-ROM immediately bring the robot to life

Basic Movements:
Forward
Back
Turn, right / left
Stand up from front / back position
Sideways, right / left

Acrobatics:
Warm-up exercise
Wave
Balance
Hand-clap

Fighting:
Attack
Defence
Turn